CNC milling and turning remove material using different motions. In milling, rotating tools cut a workpiece that is held on a table or fixture. In turning, the part rotates while a cutting tool shapes its outside or inside diameter. Many components use both processes.
Start with geometry
Rotational parts such as shafts, bushings and threaded connectors are often good candidates for turning. Parts with pockets, flat faces, slots or complex prismatic features commonly require milling. A turned blank may receive secondary milling, drilling or grinding to finish its features.
Quantity and quality matter too
For a prototype or low-volume run, flexible CNC setups can avoid the upfront cost of dedicated tooling. At higher volumes, a supplier may recommend a different process, fixtures or automation. Critical dimensions and surface finishes should be identified on the drawing, with a plan for how they will be measured.
Ask prospective manufacturers to explain their proposed process and inspection method. The best choice depends on the complete part specification, not just the material or unit price.